[1]孟均,孙勤霞,张松,等.基于EMD分解的道路连续压实质量控制指标[J].防灾科技学院学报,2017,19(04):16-22.
 Meng Jun,Sun Qinxia,Zhang Song,et al.Quality Control Index for Road Continuous Compaction Based on EMD Decomposition Strategy[J].JOURNAL OF INSTITUTE OF DISASTER PREVENTION,2017,19(04):16-22.
点击复制

基于EMD分解的道路连续压实质量控制指标()
分享到:

《防灾科技学院学报》[ISSN:1673-8047/CN:13-1377/P]

卷:
第19卷
期数:
2017年04期
页码:
16-22
栏目:
目次
出版日期:
2017-12-30

文章信息/Info

Title:
Quality Control Index for Road Continuous Compaction Based on EMD Decomposition Strategy
作者:
孟均1孙勤霞1张松1张广达2
1.北京路桥瑞通养护中心有限公司,北京100043; 2.北京工业大学道路与桥梁工程研究所,北京100124
Author(s):
Meng Jun1 Sun Qinxia1 Zhang Song1 Zhang Guangda2
1. Beijing Ruitong Road and Bridge Maintenance Center Co. Ltd, Beijing 100043, China; 2. Research Institute of Road and Bridge Engineering, Beijing University of Technology, Beijing 100124, China
关键词:
道路路基 压实质量 连续检测 控制指标 EMD分解
Keywords:
road subgrade compaction quality continuous compaction detection control index EMD decomposition
分类号:
U416.1
文献标志码:
A
摘要:
道路施工过程中,采用合理的压实度检测手段对施工质量控制尤为重要,有利于道路工程灾害防治管理。传统连续压实检测指标基于傅里叶变换,其空间位置分辨率较低。为改善这一不足,提出基于振动轮信号瞬时频谱特性的连续压实控制指标。利用振动轮-路基动力学方程,模拟了不同路基填料和振动轮激振工况下的压路机振动轮信号,将本方法与传统基于傅里叶变换的连续压实指标进行比较,验证了本方法在频谱特性分析和路基压实质量空间分辨率方面的优势。该方法可实现施工过程路基压实质量实时反馈与控制,降低后期营运期间路基病害的发生风险。
Abstract:
In the process of road construction,the adoption of a justified compaction detection method is particularly important for the construction quality control, which is beneficial to the prevention and control of road engineering disaster. The spatial resolution of traditional control index for continuous compaction detection which is based on the Fourier transform is low. To overcome this insufficiency, we proposed a new control index of continuous compaction detection based on characteristics of instantaneous frequency spectrum of vibration wheel signal. The dynamic equation of the vibratory wheel-subgrade, we simulatied the roller wheel vibration signals under the condition of different subgrade paddings and vibratory wheel excitation frequencies. then, we comparied this new method to the traditional method of continuous compaction index based on Fourier transform to demonstrate the advantages of the analysis of spectrum characteristics and the spatial resolution of subgrade compaction quality by the new method. The proposed new method can be used to achieve the real-time feedback and control of subgrade compaction quality in road construction and reduce the risk of subgrade hazards in the period of operation.

参考文献/References:

[1]柳志军. 压实方式影响路基湿度场演变规律相似模拟试验研究[J]. 岩土力学, 2013,34(11):3141-3144.
[2]刘凤妮. 高速公路的病害成因和应对措施[J]. 交通运输研究, 2014, 42(2):35-36.
[3]黄志福, 梁乃兴, 赵毅,等. 路面压实度自动连续检测技术[J]. 长安大学学报:自然科学版, 2015, 35(6):24-32.
[4]张学金, 魏连雨, 曹东伟,等. 沥青路面智能压实的适用性研究[J]. 中外公路, 2016(6):69-73.
[5]KR BER W, FLOSS E H R, WALLRATh W. Dynamic soil stiffness as quality criterion for soil compaction[C]. Geotechnics for Roads, Rail Tracks, and Earth Structure. Netherlands: A. A. Balkema, 2001: 189-199.
[6]Thurner H, Sandstrm A.Quality assurance in soil compaction:Proceedings of XII IRF world Congress[C].Madrid,1980.
[7]Thurner H, Sandstrm A.Continuous compaction control,CCC:European Workshop Compaction of Soils and Granular Materials[M]. France: Presses Ponts et Chaussees,2000.
[8]ke J. Sandstrm, Pettersson C B. Intelligent Systems for QA/QC in soil compaction[C]. Proc Annual Transportation Research Board Meeting, 2004.
[9]White D J, Thompson M J. Relationships between In Situ and Roller-Integrated Compaction Measurements for Granular Soils[J]. Journal of Geotechnical & Geoenvironmental Engineering, 2008, 134(12):1763-1770.
[10]徐立红, 费伦林, 钱劲松. 基于连续压实控制技术的路基压实质量评价方法[J]. 公路, 2017(4):47-51.
[11]Forssblad L.Compaction meter on vibrating rollers for improved compaction control [C].Proceedings of International Conference on Compaction,1980,541-546.
[12]Huang N E, Wu Z. A review on Hilbert-Huang transform: method and its applications to geophysical studies[J]. Reviews of Geophysics, 2008, 46(2): 208.
[13]Huang N E, Shen Z, Long S R, et al. The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis[J]. Proceedings Mathematical Physical & Engineering Sciences, 1998, 454(1971):903-995.
[14]杨人凤. 冲击与振动复合压实技术的研究[D]. 西安:长安大学, 2003.
[15]秦四成. 振动压路机振动压实及其系统动力学研究[D]. 长春:吉林工业大学,吉林大学, 1998.

备注/Memo

备注/Memo:
收稿日期:2017-10-25 基金项目:作者简介:孟均(1977—),男,硕士,高级工程师,主要从事道路工程、地理信息测量等方面的研究。
更新日期/Last Update: 2017-12-30