[1]沈国锋,林均岐,刘金龙,等.桥梁铅芯橡胶支座参数的优化设计研究[J].防灾科技学院学报,2018,20(01):17-24.
 Shen Guofeng,Lin Junqi,Liu Jinlong,et al.Research on the Optimization Design of Lead Rubber BearingParameters of Bridges[J].JOURNAL OF INSTITUTE OF DISASTER PREVENTION,2018,20(01):17-24.
点击复制

桥梁铅芯橡胶支座参数的优化设计研究
分享到:

《防灾科技学院学报》[ISSN:1673-8047/CN:13-1377/P]

卷:
第20卷
期数:
2018年01期
页码:
17-24
栏目:
目次
出版日期:
2018-03-31

文章信息/Info

Title:
Research on the Optimization Design of Lead Rubber Bearing Parameters of Bridges
作者:
沈国锋12林均岐1刘金龙1林庆利1
1.中国地震局工程力学研究所,中国地震局地震工程与工程振动重点实验室,黑龙江 哈尔滨150080; 2.中通钢构建设股份有限公司,山东 聊城252000
Author(s):
Shen Guofeng12 Lin Junqi1 Liu Jinlong1 Lin Qingli1
1.Key Laboratory of Earthquake Engineering and Engineering Vibration, Institute of Engineering Mechanics, China Earthquake Administration, Harbin 150080, China; 2.Zhongtong Steel Structure Co., Ltd, Liaocheng 252000, China
关键词:
铅芯橡胶支座 优化设计 屈服重力比 刚度比
Keywords:
lead rubber bearing optimal design yield gravity ratio stiffness ratio
分类号:
U441+.3
文献标志码:
A
摘要:
合理选择铅芯橡胶支座的动力参数是减、隔震桥梁充分发挥其减、隔震作用的关键。为便于今后采用减、隔震技术的桥梁更加合理地选用铅芯橡胶支座,建立了多个桥梁工况,以3条人工地震动为地震输入进行非线性时程分析,研究了铅芯橡胶支座的动力参数与桥墩刚度和上部结构质量之间的内在联系,得出了铅芯橡胶支座在不同设计谱峰值、不同桥梁结构下的最优屈服前刚度和屈服力。该研究结果可为后续桥梁的减、隔震设计提供参考。
Abstract:
The rational selection of dynamic parameters of the lead rubber bearing (LRB) is the key for bridge to play their role of mitigation and isolation. To select LRB rationally for bridges which adopt seismic mitigation and isolation technology in future, we set up several bridge conditions. Then we analyzed nonlinear time history under 3 artificial ground motions, and studied the internal relations between the dynamic parameters of LRB, the stiffness of the pier, and the quality of the superstructure. As a result, the optimum preyield stiffness and yield force of LRB at different design spectrum peaks and different bridge structures are obtained, which can provide reference for the mitigationandisolation design of subsequent bridges.

参考文献/References:

[1]叶爱君,管仲国.桥梁抗震[M].北京:人民交通出版社,2011.
[2]朱东生,劳远昌,沈大元,等.隔震桥梁设计参数的研究[J].土木工程学报,2000,33(5):52-56.
[3]李建中,辛学忠.连续梁桥减震-隔震体系非线性地震反应分析[J].地震工程与工程振动,1998,18(3):67-73.
[4]李建中,袁万城,范立础.连续梁桥减、隔震体系的优化设计[J].土木工程学报,1998,31(3):47-54.
[5]杨风利,钟铁毅,夏禾.铁路简支梁桥减隔震支座设计参数的优化研究[J].铁道学报,2006,28(3):128-132.
[6]张常勇,钟铁毅,顾正伟,杨风利.铁路连续梁桥铅芯橡胶支座优化设计研究[J].铁道学报,2012,34(5):97-102.
[7]王凯.连续梁桥减隔震支座参数设计与优化[D].成都:西南交通大学,2014.
[8]唐家祥,刘再华.建筑结构基础隔震[M].武汉:华中理工大学出版社,1993.
[9]周福霖.工程结构减震控制[M].北京:地震出版社,1997.
[10]范立础,王志强.桥梁减隔震设计[M].北京:人民交通出版社,2001.
[11]Bouc,R. Forced Vibration of Mechanical Systems With Hysteresis[C].Proceedings of the 4th Conference on Nonlinear Oscillations. Prague, Czechoslovakia.1967.
[12]Park, Wen, Ang. Random Vibration of Hysteretic Systems under bidirectional ground motions[J]. Earthquake Engineering and Structural Dynamics,1986,14(4):543-557.
[13]Wen, Y.K. Method of Random Vibration of Hysteretic Systems[J].Journal of Engineering Mechanies Dvision, ASCE,1976,102(2):249-263.
[14]JT/T 822—2011 公路桥梁铅芯隔震橡胶支座[S].北京:人民交通出版社,2012.
[15]葛俊颖.桥梁工程软件 midas Civil 使用指南[M].北京:人民交通出版社,2013.
[16]CJJ 166—2011 城市桥梁抗震设计规范[S].北京:中国建筑工业出版社,2012.
[17]JTG/T B02-01—2008 公路桥梁抗震设计细则[S].北京:人民交通出版社,2008.
[18]朱东生.桥梁抗震设计中几个问题的研究[D].成都:西南交通大学,1999.

备注/Memo

备注/Memo:
收稿日期:2018-01-15 基金项目:国家科技支撑计划课题(2015BAK17B05) 作者简介:沈国锋(1990—),男,硕士,助理工程师,主要从事桥梁减隔震优化设计研究。
更新日期/Last Update: 2018-03-30